 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Surface Mount Divider Network SOT23 Series Welwyn Components * * * * Ultra-stable TaNSil(R) resistors on silicon Reliable, no internal cavity Low cost, highly reliable, wire bonded package Small footprint, less than 0.025 square inches Electrical Data Resistance Range Absolute Tolerance Ratio Tolerance Absolute TCR Tracking TCR Operating Temperature Range Maximum Operating Voltage Noise Substrate Package Power Rating watts ppm/C ppm/C C C ohms 10R to 100K per resistor to 0.1% to 0.05% to 25 to 5 -55 to +125 100V or =PxR <-25dB Silicon 0.25 Performance Data Environmental Performance to MIL-PRF-83401 Test Thermal Shock Power Conditioning Low Temperature Operation Short Time Overload Terminal Strength Resistance to Solder Heat Moisture Resistance Shock Vibration Life High Temperature Exposure Low Temperature Storage 25% Double Load Characteristic H Limit 0.5 0.5 0.1 0.1 0.25 0.1 0.4 0.25 0.25 0.5 0.2 0.1 0.5 Max R 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.05 0.1 Typical R 0.02 0.03 0.03 0.02 0.02 0.02 0.03 0.02 0.02 0.05 0.05 0.03 0.05 General Note Welwyn Components reserves the right to make changes in product specification without notice or liability. All information is subject to Welwyn's own data and is considered accurate at time of going to print. A subsidiary of TT electronics plc Issue C * 07.03 (c) Welwyn Components Limited * Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 * Facsimile: +44 (0) 1670 829465 * Email: info@welwyn-tt.com * Website: www.welwyn-tt.com 63 Surface Mount Divider Network SOT23 Series TaNSil(R) SOT resistor networks are ideally suited for low cost divider applications that demand precision performance in a small printed wiring board footprint. Available in a SOT23 package, it is fully compatible with the latest surface mount assembly techniques. Compliant gull wing leads relieve thermal expansion and contraction stresses created by soldering and temperature excursions. Welwyn Components The tantalum nitride film system on silicon provides precision tolerance, exceptional TCR tracking and miniature physical dimensions. Excellent performance is harsh, humid environments is a trademark of self-passivating, TaNSil(R) resistor film. For applications requiring high performance resistor dividiers in a surface mount packge, specify SOT series resistors Dimensions (Inches) 0.1125" .0075 0.018" .003 3 3 0.051" .004 R2 1 R1 2 1 2 Schematic as viewed from top 0.0205" .0035 0.075" .005 0.0375" .0025 0.0395" .0045 0.005" .002 0.0005" to 0.004" 0.018" - 0.028 REF 0.0075" .004 Packaging Resistor networks are supplied taped and reeled. (c) Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 * Facsimile: +44 (0) 1670 829465 * Email: info@welwyn-tt.com * Website: www.welwyn-tt.com Issue C * 07.03 64 |
Price & Availability of SOT23
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |